The quality of the water inside your hot tub can be harmful to your health if it isn’t properly taken care of. The filter cartridge should be cleaned weekly and replaced when needed depending on use. Change water once a month or depending on use and use appropriate spa chemicals.
Please pay attention to the chemicals used and dosage. Spa damage resulting from misuse of chemicals is not covered by the warranty.
- Water Balance: We recommend you maintain your water balance: PH value: 7.2 – 7.6; Free chlorine: 2ppm – 3ppm. Purchase a test kit to test your spa water before each use of the spa, or at least once per week.
- Water Sanitation: We suggest to use Chlorine granular or Chlorine/ Bromine tablets to disinfect the spa’s water. (Chemical floater should be purchased separately). Never put tablets directly on the spa liner.
- Cleaning the spa: Clean the spa with soap and water, then rinse. Leave it outside (away from direct sunlight) to dry.
- REPAIRS (Little holes or punctures can be repaired with the repair kit that comes with the spa)
